You are using an outdated browser. Please upgrade your browser to improve your experience.
Iron-Phospour powders are Especially designed for sintering applications.
Theese pre-alloyed powders guarantee higher mechanical strenght with lower sintering temperatures.
|Description of the material and main chemical components|| |
Blend of iron powder (type Fersint RI) with Iron-Phosphour alloy powder
|Description of the manufacturing process|| |
Mix and homogenisation of two iron powders
|Typical applications|| |
Sintering of Ferrous components without major mechanical performances
|Particle shape|| |
|Main characteristic|| |
Presence of FeP permit a to form a blend suitable to pressing with no addition of other metals. Final performance being much higher compared to Basic iron powders if pressed without alloying metals
|Particle upper cut size (full range)|| |
|Particle upper cut size (typical)|| |
|Apparent density (typical)|| |
|Application notes|| |
Thermal treatments are rarely applied to this material. It is normally used with addition of lubricant an modest/none graphite
|Recommended packaging|| |
|Type||Upper cut size(µm)||Ot %||Apparent density(g/cm3)||Added elements|
|P 45||180||0.15||3,05 to 3,25||P at 0,45%|
|P60||180||0.15||3,05 to 3,25||P at 0,60%|