Result
Brass CuZn30
| Product group: | Brass powder |
| Description of the material and main chemical components: | Use of this powder permits a much simpler handling compared to pure Phosfour. |
| Description of the manufacturing process: | Water atomisation from molten alloy, sieving |
| Typical applications: | non ferrous sintering, friction, filler |
| Main characteristic of the product Type: | lower hardness, good machinability, lower mechanical preformances, higher resistance to oxidation over time (compared to sintered bronze) |
| Particle shape: | irregular to rounded |
| Particle Sieving size (Full range): | 63 to 1000 |
| Particle upper cut size (Typical): | 63 to 1000 |
| Apparent density (Typical): | 2,55 to 3,20 |
| Application notes: | Brass is used in sintering for parts with modest mechanical characteristics requiring oxidation resistance. In friction applications it is appreciated for thermal conductive characteristic and lubricant effect. Specific gold colour is often a reason of choice either in sintering and in filler use |
| Key elements: | Cu copper, Zn zinc |
| Key Processing: | Atomisation: powder |
Other grades are available
| grade | sieving size | apparent density |
| OT 1000 | 1000 | 1,55 |
| OT 212 | 212 | 2,65 |
| OT 63 | 63 | 3,2 |