Materials » Non Ferrous Powders » Copper Powders » Copper Electrolytic Standard

Copper Electrolytic Standard
  • Copper Electrolytic Standard
  • Process: electrolysis of raw copper, sieving.
  • Composition: minimum copper content of 99.5 / 99.7%
  • Apparent density: 0.65 g / cm3 up to 2.20 g / cm3
  • Particle shape: dendritic (extremely high specific surface)
  • Particle size distribution: 150 to 32 microns
Copper Cu EL/LN/LP/LT
Copper Cu EL/LN/LP/LT

Product Group: Copper Electrolytic Standard
Description of the material and main chemical components:High purity copper powder with highest dendritic shape
Description of the manufacturing process:powder from electrolytic processing starting from qualified raw material, sieving, (possible) mechanical treatment
Typical applications: Metallurgical corrections, diamond tools, friction, chemical, ferrous and non ferrous sintering, jewellery, carbon brushes
Main characteristic of the product Type:Characterised by high purity of content, and high specific surface of powder with good reactivity to most uses. They are used in Diamond tools and frictions to control heating flow and friction rates, best choice in carbon brushes. Broadly used as filler in industrial lubricants.
Particle shape:highly dendritic
Particle upper cut size (Full range): 45 to 215
Particle upper cut size (Typical):45 to 106
Apparent density (Typical):0,70 to 2,20
Recommended Pakaging:
Application notes:To improve flowability and reduce dust effect a small quantity of lubricant is normally added. Powder tends to get oxidised if stored for long.
Key elements: Cu (elctrolytic)
Key Processing: Electrolytic Powder

Other grades are available

Common Version:
grading sieving size Cu content % min Ot% apparent density
CU LNP0 63 99.5 0.4 0.7
CU LT 18 106 99.7 0.3 1.8
CU EL 215 75 99.7 0.2 2.1


Models Copper Cu EL/LN/LP/LT
Fe iron 
Cr chromium 
P phosphorous 
Ni nickel 
Mn manganese 
Cu copper 
Cu (elctrolytic)
Mo molybdenum 
Zn zinc 
Sn tin 
Various Premix additive 
AI aluminium 
tiO2 titanium dioxide 
Models Copper Cu EL/LN/LP/LT
Diffusion Bonding 
Atomisation: powder 
Atomisation: granules 
Electrolytic Powder
Mixed/Homogenised powder (ready to use) 
Model Copper Cu EL/LN/LP/LT
Diamonds Tool
Flame cutting 
Plastic/resin/ceramic filler
Carbon brush
Other iron applications 
Soft Blasting